Pixel Magic Systems VPS3800 Manual de usuario Pagina 75
- Pagina / 83
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
• Audio Output:
• You can also define any audio output port as the output of sub-picture audio. In this
case, the audio output port(s) is switched to output audio from the “audio source of sub-
picture” rather than audio from the “audio source of normal processing”
• The audio output from the sub-picture audio source has no delay
• This feature is available only in firmware version 2.00 or later
• PIP/PBP and Secondary Passthru share the video input source. Therefore, when you set
PIP/PBP to ON, it is better to turn Secondary Passthru to OFF. Otherwise the video input
source of Secondary Passthru will be taken over by PIP/PBP as the video input source of
the sub-picture
When the action button is pressed, the OSD turns to the following page:
• Use the Left/Right arrow remote control keys to adjust the sliders
• Use the Up/Down arrow remote control keys to select between different sub-picture
adjustment options
• When OK is pressed on the remote control, the whole OSD is hidden and only the slider
control is shown at the lower left corner of the display
• Pressing Back on the remote control will return you to the full OSD, or simply press the
Menu key to exit from OSD mode
• You can select a different color as the frame of the main picture and/or sub-picture. The
default is no frame
75
- Owner’s Guide 1
- SAFETY INFORMATION 2
- TABLE OF CONTENTS 5
- 7. Advanced OSD options 57 7
- 8. Troubleshooting 80 7
- 1. ABOUT CRYSTALIO II 8
- GENNUM VXP™ TECHNOLOGIES: 9
- FAROUDJA TECHNOLOGIES: 10
- 2.1 CRYSTALIO II FRONT PANEL 11
- 2.2 CRYSTALIO II REAR PANEL 13
- 2.3 REMOTE CONTROL 15
- 1 OSD group keys 16
- 2 Quick Mini Menu Selection 16
- 3 Number Keys 16
- 4 Other keys 17
- 3. HARDWARE INSTALLATION 18
- 3.4 VIDEO OUTPUTS 19
- 3.5 PRODUCT REGISTRATION 19
- 4. BASIC SETUP 20
- 4.6.1 PIXEL PERFECT 21
- 4.6.3 BASIC CALIBRATIONS 23
- DISPLAY/PROJECTOR 23
- 4.7.1 SWEET SPOT TIMINGS 28
- 4.7.2 48HZ/72HZ CADENCE LOCK 28
- 4.7.3 BASIC CALIBRATION 29
- 5. CRYSTALIO II CONFIGURATION 30
- 5.1.3 ANALOG INPUT ADJUST 31
- 5.1.4 HIDE INPUT SOURCE 32
- 5.1.5 INPUT PROFILE 32
- 5.2 IMAGE SUB-MENU 33
- 5.2.1 VIDEO SETTINGS 33
- 5.2.2 COLOR TEMPERATURE 34
- 5.2.3 GAMMA CORRECTION 34
- 5.2.4 ASPECT RATIO 37
- 5.2.5 OVERSCAN 37
- 5.2.6 POSITION 38
- 5.2.7 CROP 38
- 5.2.8 DEINTERLACE 39
- 5.2.9 NOISE REDUCER 40
- 5.2.10 DCDi 40
- 5.2.11 VIDEO PROFILE 41
- 5.3 OUTPUT SUB-MENU 42
- 5.3.1 OUTPUT SELECT 42
- 5.3.3 OUTPUT RESOLUTION 44
- 5.3.4 SCREEN SHAPE 45
- 5.3.6 OUTPUT PROFILE 47
- 5.4 AUDIO SUB-MENU 48
- 5.4.1 AUDIO INPUT SELECT 49
- 5.4.3 AUDIO DELAY 50
- 5.5 SYSTEM SUB-MENU 51
- 5.5.1 OSD OPTIONS 51
- 5.5.2 FRONT PANEL 52
- 5.5.3 PASSTHRU 52
- 5.5.4 ADVANCED OPTION 53
- 5.5.5 FACTORY SETTINGS RESET 53
- 5.5.6 FIRMWARE UPGRADE 54
- 5.5.7 IMPORT/EXPORT SETTINGS 54
- 6. FRONT PANEL CONFIGURATION 55
- FRONT PANEL LCD MENU-TREE 56
- 7. ADVANCED OSD OPTIONS 57
- 7.2 ADVANCED GAMMA CORRECTION 58
- 7.3 Y/C DELAY 60
- 7.4 NOISE REDUCER 60
- 7.5 SMOOTH SCALING 60
- 7.6.1 TRUE LIFE 62
- 7.6.2 FILM BIAS 63
- 7.6.3 FILM DETECT 63
- 7.7.1 VOLTAGE PUMP 64
- 7.8 AUDIO DELAY PROFILE 70
- 7.9 SECONDARY PASSTHRU 70
- 7.11 DYNAMICVP 77
- 8. TROUBLESHOOTING 80
- PRODUCT SUPPORT 82
- PRODUCT WARRANTY 82
Tru-weld SC1600 Arc Welder manuals
Owner’s manuals and user’s guides for Equipment Tru-weld SC1600 Arc Welder.
We providing 1 pdf manuals Tru-weld SC1600 Arc Welder for download free by document types: User Manual
Comentarios a estos manuales